ESP32 Troubleshooting Guide
Expert tips and interactive solutions for common ESP32 issues. From Wi-Fi connection problems to advanced debugging, we've got you covered.
Top ESP32 Troubleshooting Tips
- 🔌
Use a Data-Capable USB Cables
A very common issue is using a USB cable that only provides power and doesn't support data transfer. Make sure you're using a full data-capable USB cable, not a charge-only one.
Read more - 🛠️
Press the BOOT/EN Button During Upload
Some ESP32 boards require holding the BOOT button while uploading code, especially if auto-reset isn’t working reliably.
Read more - 🛠️
Install the Correct Board and Drivers
Ensure you’ve selected the correct ESP32 board in the Arduino IDE or PlatformIO, and that required USB drivers (e.g., CP210x or CH340) are installed.
Read more - ⚡
Use a Stable Power Supply
Unstable or weak power can cause brownouts and erratic behavior. Ensure your supply provides at least 500mA at 3.3V (or 5V if regulated onboard).
Read more - 🔍
Monitor Serial Output for Debugging
The Serial Monitor can reveal boot errors or crash logs. Always initialize with Serial.begin() and check the correct baud rate.
Read more - 📶
Verify Wi-Fi Credentials and Signal Strength
Typos in SSID or password are easy to miss. Also, weak signal or router settings (e.g., 802.11n-only) can prevent connection.
Read more
Need More Help?
Use our interactive wizard for step-by-step guidance on solving your ESP32 issues.
Start Troubleshooting WizardBrowse the FAQ
Find answers to common ESP32 questions, troubleshooting steps, and best practices in our comprehensive FAQ section.
Go to FAQESP32 Error Categories
WiFi Connectivity
USB and Flashing Issues
Power Issues
Flash and Boot Issues
Debugging and Monitoring
Recently Added Troubleshooting Guides
ESP32 Wi-Fi Disconnects Due to Sleep Mode
Understand how ESP32's Wi-Fi sleep settings affect connectivity and how to disable or tune them for...
Read more
ESP32 Wi-Fi Connection Failure
Troubleshoot and resolve issues when your ESP32 is unable to establish a connection with the...
Read more
ESP32 Wi-Fi Settings Incompatible with Router
Diagnose connectivity issues caused by router configurations like WPA3-only security, 5 GHz-only...
Read more
ESP32 Wi-Fi Signal Weak
Improve Wi-Fi reliability by addressing weak signal issues on ESP32 boards. Learn how distance,...
Read more
ESP32 Static IP Failure
Learn how to properly configure static IP addresses on ESP32 boards to avoid connection issues....
Read more
ESP32 Wi-Fi MAC Address Changes Unexpectedly
Learn why the ESP32's MAC address may appear to change between reboots or Wi-Fi modes, and how to...
Read more
ESP32 Fails to Reconnect to Wi-Fi Automatically
Fix scenarios where the ESP32 does not reconnect to Wi-Fi after signal loss, router reboot, or...
Read more
ESP32 mDNS Not Working
Resolve issues where the ESP32's `.local` hostname is not accessible on the network, despite...
Read more
ESP32 Wi-Fi Connects But No IP Assigned
Diagnose and resolve cases where the ESP32 connects to a Wi-Fi network but fails to obtain an IP...
Read moreStill Stuck with an ESP32 Issue? Let's solve it together.
Our interactive troubleshooting wizard will guide you through common ESP32 problems and their solutions, step by step.